Aqua4 represents the “turnkey” solution, 100% made in Maggi Group to set the best technological platform for anchor calibrated chain, projected to get breaking load till 43 kg/mm2.

Thanks to the careful selection of special steels and high quality processes, Maggi Group products exceed standard mechanical performances. The European technical standards have set the mechanical and dimensionaI features of anchor chain for the boating industry and have always based on a traction breaking stress equal to 30 kg/mm2.
This is why Maggi Group basic range of calibrated anchor chains takes on the quality-distinctive brand of Aqua4.

Hot dip galvanized to last longer in seawater, Aqua4 chains represent the best choice in terms of quality, long-life and good resistance to salt corrosion. Aqua4 chains can be also certified by RINA.

Aqua4 chains are available in diameters from 4 to 20 mm. The dimensions and the class tolerance correspond to the standard norm. In the dedicated section of the catalogue you will find indications of breaking loads.

Aqua4 compared to a standard chain grade 30 with the same diameter (according to  German standards DIN)  ensures 33% better mechanical performances and a higher breaking load getting  a higher working load.

GALVANIZATION
Aqua4 is a hot dip galvanized chain with 60 micron minimum thickness
CALIBRATED CHAIN
CALIBRATED, TESTED
Steel
SECTOR
PACK
Hot dip galvanized codedPbWeight kg/mWorking load kNBreaking load kN
CA76ZIF04041613,60,3528
CA76ZIF050518.5170,5315,7
CA76ZIF060618,522,20,8520
CA76ZIF07072225,91,17,530,8
CA76ZIF08082427,21,41040
CA76ZIF090927301,81045
CA76ZIF1001028362,312,563
CALIZIF1001030372,212,563
CALIZIF120123643,23,1217,590
CA76ZIF130133648,13,920106
CALIZIF1401442504,425125
CALIZIF160164859,25,732150
CA76ZIF1801850657,0340160
CA76ZIF2002056728,6850200

Can’t find the chain you’re interested in? Please contact us.